Audi RS3 on Gram Lights 57DR 18x9.5 +38 (Custom Drilled 5x112)
This Nardo Grey 8V Audi RS3 sedan rolls on Gram Lights 57DR wheels in 18x9.5 +38, custom drilled to 5x112. We were the first to ever put the 57DR in 18x9.5 +38 on an RS3. The setup drops an inch of wheel diameter from stock and adds an inch and a half of width, which fills the RS3's flared arches without spacers.



The fitment specs
| Spec | Factory RS3 (8V) | This build |
|---|---|---|
| Wheel | 19x8 ET49 | Gram Lights 57DR, 18x9.5 +38 |
| Bolt pattern | 5x112 | 5x112 (custom drilled) |
| Center bore | 57.1 mm hub | Hub-centric rings to 57.1 mm |
| Lug bolts | M14x1.5, 120 Nm (89 lb-ft) | M14x1.5, 120 Nm (89 lb-ft) |
| Finish | - | Gloss Black |
| Spacers | - | None |
What 18x9.5 +38 does on an RS3
Compared with the factory 19x8 ET49, the 18x9.5 +38 is 38 mm (1.5") wider and 11 mm lower in offset. That moves the outer lip out about 30 mm and the inner barrel in about 8 mm. Most of the extra width goes outward, toward the fender, which is why the wheel fills the arch without spacers. The inner side changes very little.
Dropping from 19" to 18" also gives you more tire sidewall. That means better protection for the rim on rough roads and a little less unsprung weight on a car that already makes plenty of power. As the photos show, the 18" 57DR still clears the RS3's factory front brakes.
Tire sizes for 18x9.5 on the RS3
The stock 235/35R19 measures about 647 mm tall. A 265/35R18 is about 643 mm (-0.7%), so the speedometer stays close to stock. A 255/35R18 is about 636 mm (-1.8%) and gives a slightly squarer sidewall. Either suits a 9.5" rim. Ride height, camber and tire brand all affect fender clearance, so ask us before you order a tire for a lowered car.
Why the custom drill matters
Gram Lights makes some 57DR sizes in 5x112, but not the 18x9.5 +38. That size comes in patterns like 5x100, 5x114.3 and 5x120, which is why you never saw it on an Audi until this build. We drill the wheels to 5x112 ourselves and ship them with hub-centric rings for the RS3's 57.1 mm hub. The result is a proper bolt-on fitment for Audi, VW and other 5x112 cars, with no adapters or wobble bolts.
Get this exact setup
Gram Lights 57DR Gloss Black 18x9.5 +38, custom drilled to 5x112. It's the same wheel shown on this RS3.
Shop the 57DR 18x9.5 +38FAQ
- Do Gram Lights 57DR 18x9.5 +38 fit an Audi RS3?
- Yes. This 8V RS3 runs them on all four corners with no spacers, custom drilled to 5x112 and centered with 57.1 mm hub rings.
- Will 18" wheels clear the RS3 brakes?
- The 57DR in 18x9.5 clears the factory RS3 front brakes on this car. If you have aftermarket big brakes, send us your caliper model and we'll check clearance.
- Do I need spacers?
- No. At +38 the wheel already sits about 30 mm further out than the factory wheel.
- Does this fit the 8Y RS3 or the S3 and A3?
- They all use 5x112 with a 57.1 mm hub, but brake size and the factory offsets differ by model. Send us your car and we'll confirm before you buy.
Want your car in the gallery? Send photos of your 5x112 build to us through the contact page.
